Every Number Published, Including the Labour
Session fees are credited in full against anything we build for you. Component cost is separate and quoted at the desk before you agree to anything — we do not mark shafts up beyond a fixed percentage and we will tell you what that percentage is if you ask.
Spec Card Review
$65 30 minutes / bench only- Loft and lie read on every iron and wedge
- Frequency plot across the set
- Grip size and build-up recorded per club
- Printed card, no ball striking
Single Club Fitting
$150 75 minutes / one bay- Baseline delivered loft on your current club
- Shortlist of three or four shafts by bend profile
- Outdoor doppler verification
- Full written spec for the build
Iron Set Fitting
$235 2 hours / one bay- Frequency line plotted across the whole set
- Lie angle checked against a strike board
- Gapping resolved on carry, not stamped loft
- Set makeup recommendation at the bottom end
Tee Shot Fitting
$195 90 minutes / one bay- Driver and one fairway wood together
- Attack angle and spin loft resolved as a pair
- Head loft set after the shaft decision
- Length and swingweight targets recorded
Full Bag Review
$395 3.5 hours / both bays- Every club measured, every gap examined
- Priority list of what to change and what to leave
- Written plan you can execute over two seasons
- Booked as a morning, one per day maximum
Putter Station
$120 60 minutes / indoor- Stroke arc and face rotation captured
- Shaft lean and effective loft at contact
- Length, lie and toe hang matched to the stroke
- Counterweight options tested live
Labour, Charged Per Club and Nothing Hidden
Most shops fold assembly labour into a component price so the two cannot be separated. We list them apart, because a golfer bringing their own shaft deserves to know exactly what the bench work costs and a golfer buying from us deserves to know what portion of the invoice is the part and what portion is the work.
Everything below is per club and includes the re-measurement afterward. Nothing leaves this bench without being read against its target spec, and that check is never a line item.
Epoxy cures overnight without exception, which means a reshaft booked on Tuesday morning is ready Wednesday, not Tuesday afternoon.
Bench Rates
| Reshaft, per club (labour) | $32 |
|---|---|
| New build assembly, per club (labour) | $38 |
| Regrip, per club (labour) | $9 |
| Loft or lie adjustment, per club | $8 |
| Shaft pull and reuse, per club | $18 |
| Spine location and orientation | $16 |
| Swingweight correction, per club | $7 |
| Frequency plot, full set | $45 |
| Broken shaft extraction | $25 |
| Length change, per club | $14 |
How the Credit Works
Book a $235 iron set session, decide to build the set with us, and $235 comes off the invoice. It is not a discount code and it does not expire in thirty days — the credit sits against your name for a full year, which matters because plenty of people fit in spring and buy in autumn.
The credit applies once per session, against components and labour alike. It does not stack across multiple sessions into a single purchase, and it is not redeemable for cash, which we mention only because somebody has asked.
What Is Not on This Page
Component prices. Shafts run from about seventy dollars to well past four hundred, heads vary more than that, and quoting a range here would be more misleading than useful. What we can promise is that the component quote arrives in writing before the build starts, itemised, with the labour listed separately using the rates above.
Deposits: full bag reviews take a $100 deposit at booking because the slot blocks a whole morning. Everything else is paid at the studio. Twenty-four hours notice on a cancellation and the deposit rolls to the new date.
Pick a Session and We Will Confirm the Slot
If you are unsure which one fits your situation, call the desk and describe the problem. It takes two minutes to sort out and saves you booking the wrong thing.